Dewatering submersible sump pumps with a choice of single or three phase models. Can be used for Sump empty, Septic water disposal, Water transfer and Pumping of neutral, non-aggressive factory waste water.

Operating Limits
Capacities to 1250lpm
Heads to 20m
Max. Submergence 25m
Max. Operating temperature 50 c

Suitable Fluids
Clean or “grey water” of neutral pH containing up to 10% small soft solids or 1% fine solids. Some wear should be expected while pumping hard solids in suspension.

Double cased submersible dewatering sump pump. Can be used for Domestic fountains or waterfalls*, Sump emptying, Emergency flood relief, Water transfer, Pumping of partially submerged applications

Operating Limits
Capacities to 80lpm
Max. Total head 6m
Max. Submergence 10m
Max. Operating temperature 50oC
Outlet size 1” BSP(M)

Suitable Fluids
Clean water of neutral pH containing up to 10% small soft organic solids (<10mm OD). Some accelerated wear should be expected while pumping hard solids in suspension.

High head single channel sewage handling submersible sump pumps with a choice of single or three phase motors. Can be used for Sewage water pumping, Sump emptying, Septic effluent disposal, Water transfer, Pumping of light slurries and factory waste

Operating Limits
Capacities to 1100lpm
Heads to 24.5m
Max. Submergence 25m
Max. Operating temperature 50oC
Max. Soft solids up to 80% off Discharge size

Suitable Fluids
Semi-screened sewage or “grey water” of neutral pH containing up to 20% small soft solids or 1% fine solids. Some wear should be expected while pumping hard solids in suspension.

Submersible pond pump with adjustable inlet strainer. Designed for continuous operation -24 hours a day, 7 days week. Can be used for Fountains, Pond recirculation, Waterfalls and other water features, Koi & fish ponds, Freshwater aquaculture.

Operating Limits
Capacities to 140lpm
Max. Total head 6.9m
Max. Submergence 3m
Max. Operating temperature 35oC
Outlet size 1 1/4” BSP(F)
Strainer adjustment 5mm (min)
10mm (max)

Suitable Fluids
Clean pond water of neutral pH containing up to 1% (<10mm OD) small soft organic solids. (Some wear should be expected while pumping hard solids in suspension).
Note: Suitable for fully submerged applications only.

High flow vortex submersible sump pumps with a choice of single or three phase motors. Can be used for Grey water pumping, Sump emptying, Septic effluent disposal, Water transfer, Pumping of light slurries and factory waste

Operating Limits
Capacities to 500lpm
Heads to 9m
Max. Submergence 25m
Max. Operating temperature 50oC
Max. Soft solids 60mm O.D.

Suitable Fluids
Clean or “grey water” of neutral pH containing up to 20% small soft solids. Some wear should be expected while pumping hard solids in suspension.

Stainless steel shell, double cased submersible dewatering sump pump. Can be used for Dirty water pumping, Sump emptying, Septic effluent water disposal, Pumping of waste water with small soft solids in suspension, Pumping of partially submerged applications

Operating Limits
Capacities to 240lpm
Max. Total heads 12m
Max. Submergence 10m
Max. Operating temperature 50oC
Outlet size 2” BSP(F)

Suitable Fluids
Sewage or “grey water” of neutral pH containing up to 10% small soft organic solids (<10mm OD). Some accelerated wear should be expected while pumping hard solids in suspension.

High head single channel sewage handling submersible sump pumps with cutting impeller. Available in single or three phase motors. Can be used for Sewage water pumping, Sump emptying, Septic effluent disposal, Water transfer, Pumping of light soft slurries and factory waste.

Operating Limits
Capacities to 1100lpm
Heads to 24.5m
Max. Submergence 25m
Max. Operating temperature 50oC
Max. Soft solids up to 80% of Discharge size

Suitable Fluids
Semi-screened sewage or “grey water” of neutral pH containing up to 20% small soft solids or 1% string like solids. Some wear should be expected while pumping hard solids in suspension.
Note: Cutter pumps are not suitable for sanitary products use Grinder models.

- Double Mechanical Seals in oil bath for superior reliability and long life.
- Corrosion resistant 304 Stainless Steel shaft, motor shell and fasteners.
- Solids handling grinder inlet with high head open impeller to pump water containing soft solids in suspension.
- Seal sensor fitted to allow detection of first stage seal failure prior to motor damage through water entry.

Operating Limits
Capacities: 170lpm
Heads to: 25m
Max. Submergence 25m
Max. Operating temperature 50oC
Outlet size 1 1/4” F

Suitable Fluids
Sewage or “grey water” of neutral pH containing up to 20% soft organic solids. (Some wear should be expected while pumping hard solids in suspension).

- Double Mechanical Seals in oil bath for superior
reliability and long life.
- Solids handling vortex design to pump light slurries and water containing soft solids in suspension.

Operating Limits
Capacities to 240lpm
Heads to 7.5m
Max. Submergence 12m
Max. Operating temperature 50oC
Max. Soft solids
D15VA 20mm O.D.
D25VA 25mm O.D.
D40VA 35mm O.D.

Suitable Fluids
Clean or “grey water” of neutral pH containing up to 10% small soft solids or 1% fine solids. Some wear should be expected while pumping hard solids in suspension.

Submersible sump pump with twin impeller design for higher pressure, up to 26m head. Can be used for Lawn & garden irrigation, Sump emptying to higher heads Treated, effluent disposal, Water transfer from wells.
“A” suffix models equipped with present length automatic float switch fitted for automatic operation.

Operating Limits
Capacities to 110lpm
Heads to 26m
Max. Submergence 12m
Max. Operating temperature 50oC
Max. Soft solids 1.9mm O.D.
Outlet size(BSP) 1”F

Suitable Fluids
Clean water of neutral pH containing up to 1% small solids. Some wear should be expected while pumping hard solids in suspension.